ElectronicsParadise.com Home
APC Smart-UPS RT 8000VA 208V

Click here to buy APC Smart-UPS RT 8000VA 208V.   APC Smart-UPS RT 8000VA 208V
$8,372.00
at Global Industrial
on 1-15-2018
BUY NOW

Product Features

Product Specifications

    • BATTERY TYPE - Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
    • BRAND - APC®
    • NOMINAL OUTPUT VOLTAGE - 208V
    • INPUT FREQUENCY - 50/60 Hz +/- 5 Hz (auto sensing)
    • TYPICAL RECHARGE TIME - 2.20 hour(s)
    • CREST FACTOR - 3 : 1
    • MANUFACTURERS PART NUMBER - SURT8000XLT
    • OUTPUT FREQUENCY (SYNC TO MAINS) - 50/60 Hz +/- 3 Hz user adjustable +/- 0.1
    • INPUT CONNECTIONS - Hard Wire 3-wire (2PH + G)
    • OUTPUT CONNECTIONS - (1) Hard Wire 3-wire (2PH + G), (2) NEMA L6-20R, (2) NEMA L6-30R
    • EFFICIENCY AT FULL LOAD - 93 Percent
    • OUTPUT POWER CAPACITY - 6400 Watts / 8000 VA
    • WAVEFORM TYPE - Sine wave
    • MAX. CONFIGURABLE POWER - 6400 Watts / 8000 VA

Product Description
APC Smart-UPS RT 8000VA 208V

APC Smart-UPS On-Line, 6400 Watts / 8000 VA,Input 208V / Output 208V, Interface Port DB-9 RS-232, RJ-45 10/100 Base-T, Smart-Slot, Extended runtime model, Rack Height 6 U. Includes: CD with software, Service Manual, Smart UPS signalling RS-232 cable, User Manual, Web/SNMP Management Card.
  • Automatic internal bypass - Supplies utility power to the connected loads in the event of a UPS overload condition or fault.
  • Scalable runtime - Allows additional run time to be quickly added as needed.
  • Intelligent battery management - Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Hot-swappable batteries - Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  • Automatic restart of loads after UPS shutdown - Automatically starts up the connected equipment upon the return of utility power.
  • Temperature-compensated battery charging - Prolongs battery life by regulating the charge voltage according to battery temperature.
  • Network manageable - Provides remote management of the UPS over the network.
  • InfraStruXure Manager Compatible - Enables centralized management via the APC InfraStruXure Manager.
  • SmartSlot - Customize UPS capabilities with management cards.
  • LED status indicators - Quickly understand unit and power status with visual indicators.
  • Serial Connectivity - Provides management of the UPS via a serial port.
  • Plug-and-Play external batteries - Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
  • Rack/Tower convertible - Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
  • Flash upgradeable firmware - Install maintenance releases of firmware remotely using FTP.
  • User-replaceable batteries - Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
  • Automatic self-test - Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Predicitive failure notification - Provides early-warning fault analysis ensuring proactive component replacement.
  • Disconnected battery notification - Warns when a battery is not available to provide backup power.
  • Audible alarms - Provides notification of changing utility power and UPS conditions.
  • Frequency and voltage regulation - Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
  • Power conditioning - Protects connected loads from surges, spikes, lightning, and other power disturbances.
  • Input power factor correction - Minimizes installation costs by enabling the use of smaller generators and cabling.
  • Generator compatible - Ensures clean, uninterrupted power to protected equipment when generator power is used.
  • Cold-start capable - Provides temporary battery power when the utility power is out.
  • Resettable circuit breaker - Easy recovery from overloads; no need to replace a fuse.
  • Safety-agency approved - Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. UL, FCC, CE, C-Tick approvals.




Search For Products:

Powered by Arc Spider - Smart Shopping Search Engine   
Privacy Statement





NOTICE: All product prices, availability, and specifications
are subject to verification by their respective retailers.


Copyright © 2018 Dominant Systems Corporation
info@electronicsparadise.com         Privacy Policy
Last Modified : 1-15-2018